We came across this neat product called SnapPower, which adds a USB port to an outlet cover. This seemed like a great solution for a bedroom, kitchen, or anywhere you need to charge your phone, tablet, camera, and more!
Before we discovered this product, the only way to add a USB was to completely remove the existing outlet and wire in a new USB compatible one. This one requires no wiring! We ordered one on Amazon to give it a try. It really is a fast way to add some tech to your home! 
The USB port can charge your phone without the need of the "brick" as well as anything that uses a USB port.
These tabs on the back of the plate receive power from the outlet which then powers the USB--no wiring needed.
The first step in any electrical project is to locate the correct circuit breaker and turn OFF the power. Use a power tester or a lamp to be sure the power is OFF.
With a flat head screwdriver, remove the screw holding the outlet plate in place. Remove.
Remove the old plate and replace with the USB plate. Screw into place.
Turn ON the power.
Always read instructions before installing.
...and, we're done!
USB enabled outlets are a real convenience for all your USB devices because you don't have to use the charging "brick." We especially like ours in the kitchen where it makes a logical place to charge a phone--just stash the cord in a drawer for easy access.
Please note: We are not sponsored by any of the companies/products that we used. These products were picked and bought by us. FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. Safety first! FYI: Affiliate links are being used on this page. Purchasing via these links help support MDP! Related Projects
0 Comments
Leave a Reply. |
Steph & VickiWelcome to Mother Daughter Projects!
We're homeowners sharing our DIY adventures as we learn to maintain, improve, decorate, and use tech in our homes. Share your projects with us here: #trylearnshare
Categories
All
|
