|
text by Vicki Sign up to get Mother Daughter Projects updates in your email! Until recently, there were no hard surfaces near Steph's couch to set snacks and beverages. We had seen this idea for a flexible hard surface on Pinterest and decided to give it a try! Be sure to watch the video, it's really short, but it gives you the entire run down on how to make one. It can be customized to whatever size you need. 
 The tray is made with 25 pieces of screen molding all cut to 12" each.  Mark the first piece at 12" and cut in a miter box with a saw. This piece can now be used to measure all the rest of the pieces.  Using a piece of 150 grit sandpaper, sand any rough ends and edges. Remove the paper labels from the back of the pieces.  If you're staining your tray do that now, let dry, then add a protective finish.  Lay the pieces right side down, line the ends up with a straight edge like a ruler.  Remove the protective paper from the self-stick felt and put on the back and you're done!
This is a quick project that uses few tools and techniques. It makes a great gift! The size can be customized as well as the finishes to suit the recipient. Please note: We are not sponsored by any of the companies/products that we used. These products were picked and bought by us. FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. Safety first! FYI: Affiliate links are being used on this page. Purchasing via these links help support MDP! Related Projects
2 Comments
Barbara Williams
6/6/2020 10:02:02 pm
Please add me to your newsletter. Thank you
Steph
6/7/2020 09:28:52 am
Added! Leave a Reply. |
Mother Daughter Projects
|
