Mother Daughter Projects

  • Blog
  • About
    • Contact
    • Privacy Policy
  • Tools
    • Tool Tuesday
  • Maintenance
  • Improvement
  • Decor
  • Tech
  • Blog
  • About
    • Contact
    • Privacy Policy
  • Tools
    • Tool Tuesday
  • Maintenance
  • Improvement
  • Decor
  • Tech

DIY for Homeowners

How to Repair Broken Concrete on a Driveway

7/3/2019

2 Comments

 
text by Vicki     Sign up here to join our weekly email newsletter! ​

This post is sponsored by The Home Depot.
There's a small patch of concrete in my driveway that was broken a few years ago from a falling tree. It's on the edge, so it's not a big deal, thus a repair was not high on the list of DIY projects.

With the arrival of a Bosch self-sharpening wide chisel in this quarter's shipment of The Home Depot ProSpective tools, we knew it was time to make the repair. We got a Bosch hammer drill in the first year of the program so with the new chisel and hammer drill we were ready to break up some concrete! 

Follow along as we made our very first concrete repair.

Materials/Tools:


  • Bosch Bulldog Xtreme 8 Amp 1 in. Corded Variable Speed SDS-Plus Concrete/Masonry Rotary Hammer Drill (Home Depot)

  • Bosch Bulldog Xtreme 1-1/2 in. x 10 in. SDS-Plus Hammer Steel Self-Sharpening Wide Chisel(Home Depot)

  • RIDGID 18-Volt OCTANE Brushless Cordless 7-1/4 in. Circular Saw (Home Depot)

  • Rapid Set 25 lb. Cement All Multi-Purpose Construction Material (Home Depot)

  • Husky 5 in. x 2 in. Pro Margin Trowel (Amazon)

  • Grade Stakes-Pine (Home Depot)

Using the Bosch rotary hammer with self-sharpening wide chisel.
The first step was to make gravel of that broken concrete patch. This is a powerful, effective tool which easily broke up the concrete into manageable parts.
The first step to a concrete repair is to remove the old broken concrete.
It would have taken forever to do this manually! The right tools made this almost effortless.
Cutting with the Ridgid 18 V brushless circular saw.
Steph is using the new Ridgid brushless circular saw to cut our form piece to size. It is battery powered.
Creating a wood form to hold the concrete in place.
This form will keep the concrete in place. It is held in place with two wood stakes.
Mixing up Rapid Set Cement All to make the concrete rapir.
Ready. Set. Mix. Pour. And do it fast! We are using Rapid Set CementAll which sets up in 15 minutes and cures to structural strength in about one hour. Working together we were able to mix and pour before it set up. We followed the manufacturer's instructions to use cold water to slow down the process just a bit.
Pouring the Rapid Set to make the repair.
Prior to pouring the concrete, we wet down the surface. We dried up any water that puddled before pouring. We were a bit messy in the pour!
Smoothing the Rapid Set Cement All repair.
Troweling the surface to smooth it out. It was challenging since the concrete slap is uneven.
We covered the repair with plastic wrap to help slow the curing.
We covered the repair with plastic wrap to help slow the curing.
The DIY concrete repair is finished.
All done. It's not pretty, but we are okay with our first ever attempt at making a concrete repair.
We acknowledge that The Home Depot is partnering with us to participate in the ProSpective 2019 Campaign. As a part of the Program, we are receiving compensation in the form of products and services, for the purpose of promoting The Home Depot. All expressed opinions and experiences are our own words. Our post complies with the Word Of Mouth Marketing Association (WOMMA) Ethics Code and applicable Federal Trade Commission guidelines.

FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. Safety first!

FYI: Affiliate links are being used on this page. Purchasing via these links help support MDP!

Related Projects

Picture
Replace Joints in Concrete
Picture
Repair Uneven Concrete
Picture
7 Tips for Exterior Caulking
2 Comments
pam
7/4/2019 02:44:22 pm

to fix slope, make another small batch of concrete in small tub, a bit thicker so you can trowel over existing area and smooth out the slope , should hold since the first is newer , or use what is called concrete repair patching. works the same way. put your form back and go over patch

Reply
Steph
7/5/2019 10:08:02 am

Great- thanks Pam!

Reply



Leave a Reply.

    MotherDaughterProjects.com

    Mother Daughter Projects
    ​
    Steph & Vicki

    We're homeowners sharing our DIY adventures as we learn to maintain, improve, decorate, and ​use tech in our homes.
    Share your projects with us here:  
    ​#trylearnshare
    MotherDaughterProjects.com
Mother Daughter Projects, LLC ∙ est. 2015 ∙ Tallahassee, FL by Vicki & Steph ∙ Privacy Policy